Difference between revisions of "Features requested for Architecture"

From Blender for Architecture
Jump to: navigation, search
(To do)
(To do)
Line 2: Line 2:
  
 
== To do ==
 
== To do ==
 +
 +
=== Interactive rendering enhancements ===
  
 
* Properly lighted procedural textures visible in OpenGL mode. In example like Lightwave...or better ;-) :  
 
* Properly lighted procedural textures visible in OpenGL mode. In example like Lightwave...or better ;-) :  
Line 19: Line 21:
 
Lighting and materials can be previewed directly within the user interface with a much higher degree of accuracy than ever before."
 
Lighting and materials can be previewed directly within the user interface with a much higher degree of accuracy than ever before."
 
</pre>
 
</pre>
 +
http://www.cgtimes.com.cn/upload/2006_07/06071413171045.jpg
  
 +
=== Snap and dimensions ===
 
* Proper units and measurement system.
 
* Proper units and measurement system.
 
** Sufficient significant digits to convert between units with imperceptable error.
 
** Sufficient significant digits to convert between units with imperceptable error.
Line 25: Line 29:
 
** Direct preference association with each model so that imports of various units are properly scaled.
 
** Direct preference association with each model so that imports of various units are properly scaled.
 
* Ability to move objects based on a "relative" distance from a point.
 
* Ability to move objects based on a "relative" distance from a point.
* Better import/export of commonly used file formats like .DXF, .DWG, .3DS, etc.
+
* "Dimensions" tool that can add dimensions in plan, elevations, etc.
 
* Ability to define arbitrary planes based on 3d angles, or by picking three points/two edges/one face and work on those arbitrary planes as they were the "base plan" (xoy). Also constrains perpendicular to this arbitrary plane.
 
* Ability to define arbitrary planes based on 3d angles, or by picking three points/two edges/one face and work on those arbitrary planes as they were the "base plan" (xoy). Also constrains perpendicular to this arbitrary plane.
* "Dimensions" tool that can add dimensions in plan, elevations, etc.
+
http://www.newtek-europe.com/uk/support/tutorials/tut9/1.html
* A "PrintingEditor" that can work with the layouts and plot them "at scale". Printing capabilities for lines (continuous, dash, center line, etc. , thickness of a line, colors, etc. - all features that are needed to plot a complete set of construction drawings). If we could combine somehow Blender with a vector based tool - such as Inkscape, OpenOffice or similar - that might produce the result acceptable for "professional printing".
+
 
 +
=== Others ===
 
* "LandscapeBuilder" a tool to build and plant real landscape based on contour lines.
 
* "LandscapeBuilder" a tool to build and plant real landscape based on contour lines.
* Easy use of Gameblender to visit our building like in a FPS game.
 
 
* Possibility to link to a database so to be possible to get "Bills of materials", to know "quantities" of a material is in the model (ie: to know how many cubic meters/feet of brick, concrete, marble,ceramic tiles, etc. or square meters/feet for paints, etc.) Maybe trying to link to OpenOffice database would be a possibility.
 
* Possibility to link to a database so to be possible to get "Bills of materials", to know "quantities" of a material is in the model (ie: to know how many cubic meters/feet of brick, concrete, marble,ceramic tiles, etc. or square meters/feet for paints, etc.) Maybe trying to link to OpenOffice database would be a possibility.
 +
* Better import/export of commonly used file formats like .DXF, .DWG, .3DS, etc.
 +
* A "PrintingEditor" that can work with the layouts and plot them "at scale". Printing capabilities for lines (continuous, dash, center line, etc. , thickness of a line, colors, etc. - all features that are needed to plot a complete set of construction drawings). If we could combine somehow Blender with a vector based tool - such as Inkscape, OpenOffice or similar - that might produce the result acceptable for "professional printing".
 +
 +
* Easy use of Gameblender to visit our building like in a FPS game.
 
* Texture backing for non UV textured objects
 
* Texture backing for non UV textured objects
  

Revision as of 19:21, 25 March 2007

Here you can find a list of features we would like to see in Blender to improve Architectural workflow:

To do

Interactive rendering enhancements

  • Properly lighted procedural textures visible in OpenGL mode. In example like Lightwave...or better ;-) :
Complete Re-implementation of Open GL in Layout

* Much faster UI performance
* Preview Lighting scenarios within the UI
* Less need for preview renders
* Hardware shading of materials and textures
* Hardware shading of procedural textures

LightWave v9 Layout fully supports the OpenGL 2.0 specification. 
Results from real time OpenGL shading very closely mirror the results of the LightWave rendering engine, 
which reduces the amount of test renders that are required. 
Lighting and materials can be previewed directly within the user interface with a much higher degree of accuracy than ever before."

http://www.cgtimes.com.cn/upload/2006_07/06071413171045.jpg

Snap and dimensions

  • Proper units and measurement system.
    • Sufficient significant digits to convert between units with imperceptable error.
    • Input methods to handle various system conventions (English feet and inches, Metric meters and millimeters, English decimal feet, light years, etc.)
    • Direct preference association with each model so that imports of various units are properly scaled.
  • Ability to move objects based on a "relative" distance from a point.
  • "Dimensions" tool that can add dimensions in plan, elevations, etc.
  • Ability to define arbitrary planes based on 3d angles, or by picking three points/two edges/one face and work on those arbitrary planes as they were the "base plan" (xoy). Also constrains perpendicular to this arbitrary plane.

http://www.newtek-europe.com/uk/support/tutorials/tut9/1.html

Others

  • "LandscapeBuilder" a tool to build and plant real landscape based on contour lines.
  • Possibility to link to a database so to be possible to get "Bills of materials", to know "quantities" of a material is in the model (ie: to know how many cubic meters/feet of brick, concrete, marble,ceramic tiles, etc. or square meters/feet for paints, etc.) Maybe trying to link to OpenOffice database would be a possibility.
  • Better import/export of commonly used file formats like .DXF, .DWG, .3DS, etc.
  • A "PrintingEditor" that can work with the layouts and plot them "at scale". Printing capabilities for lines (continuous, dash, center line, etc. , thickness of a line, colors, etc. - all features that are needed to plot a complete set of construction drawings). If we could combine somehow Blender with a vector based tool - such as Inkscape, OpenOffice or similar - that might produce the result acceptable for "professional printing".
  • Easy use of Gameblender to visit our building like in a FPS game.
  • Texture backing for non UV textured objects

Work in Progress

Done

  • Texture baking : added in 2.43
  • Snap inside objects : added in 2.43
  • Outliner where you can choose which object to see, render, modify : added in 2.43
  • Working together : Verse (in source, not in builds) , proxy object (2.43), append.